Vehicle GPS tracker YB02 is one of the independently researched and developed GPS products from YUEBIZ Technology Co., Ltd. which adopted imported high gain GPS module and unique dual mode design, global commonly used GSM receiving antenna, with the lowest power consumption design, so it’s a most suitable and easily hidden and installed GPS tracker in car because of small type and light weight.
|Global commonly used 4 frequencies
Quad band(GSM 850/900/1800
|10 meters, 2D RMS
1 second(all data is valid, start within
2 hours since the last positioning)
32 seconds(initialization data loaded,
start after 2 hours since the last positioning)
(first start, ephemeris cleared and then start,
move out about 1,000 km and then start)
|GSM/GPRS(class 12, TCP/IP)
|Very lower than the national standard
|Working voltage range
|9 – 90 V DC
|-20 to +70 ℃
|20 – 80% RH
|22 mA(12 V DC), 12 mA(24 VDC)
|Operating system for phone APP
|Android 2.3 & higher, IOS 5.0 & higher
Length: 87 mm
Width: 43 mm
Height: 14 mm
Packing size: 13.3 × 9.8 × 5.5 cm/piece
GPS indicator light (Green)
When GPS isn’t working, this light will be twinkling.
When GPS works normall, the light will be always lighting.
GSM indicator light (Blue)
When GSM receives signals normally, this light will be always lighting.
When there are no GSM signals, the light will be twinkling.
Power indicator light (Red)
When the tracker connects the power of DC 9 – 24V, this light will be always lighting until 5 minutes passed. Once the trackers receives calling, it lights again, and will be turned off after 5 minutes.
|To connect the car battery.
|GPS accuracy: 10 meters, 2D RMS
|SIM card slot
|Gas & electricity remotely cutting/recovering
|By messaging or Web platform/IOS & Android APP operating.
|Low voltage alarming
|A warning message will be sent to Web platform & phone APP if the voltage is too low.
|A warning message will be sent to Web platform & phone APP if the vehicle is shaking.
|A Geofence can be set and the warning messages will be sent once the tracker was out of the geofence.
|Historical route replaying
|The historical moving route of the latest 3 months of the watch can be replayed.
|Base station auxiliary positioning
|Residual energy display
|The residual energy of the tracker can be displayed on the Web tracking platform and phone APP.
|Low power consumption mode
|It’ll stay automatically if it moves less than 200 meters within 10 minutes
|GSM blind port storage
|Positioning data will be saved when there is no GPRS signal until the signal is found and the data uploded.
|The situation of ACC can be checked on the Web platform & phone APP.
|Out of electricity supplying alarm
|A warning message will be sent to the Web platform & phone APP once the tracker is out of electricity supplying.
|The interval of time of uploading positioning data adjustment
-It’s cheaper than same type product for at least 20%.
-It’s easy to hide in car because it’s small & lightweight so It can be used for anti-theft.
-It can remotely cut(or recover) the gas & electricity and can be rested(or started) remotely by SMS/android APP/IOS APP/web page.
-It binds phone number, which means, text message will be sent to another phone number when its voltage is too low and it was out of the geofencing.
-It supports inspection of its position and residual energy by Android /IOS APP.
-It supports base station auxiliary positioning so the accuracy is high.
-It has internal shock sensor and movement recognition system so the warning message will be sent when the vehicle is shaking or some situations happened.
-It can feedback the realtime position information by sending messages.
-It has global commonly used quad band.
-It has a function of GSM blind port storage which can save the positioning data when there is no GPRS signal until the signal is found and the data uploded.
-It’ll feedback if the ACC is on or off and the user can check it on the Web tracking platform and phone APP.
-It’ll send a warning message once it out of charging.
-It’ll stay automatically if it moves less than 200 meters within 10 minutes so it’s very power-saving.
-Its integration level is very high so it’s easy to install.
-Its time interval of automatically uploading positioning data can be set.
-It’s dual-mode so the accuracy is high.