| GPS indicator light (Green) | When GPS isn’t working, this light will be twinkling. When GPS works normally, the light will be always lighting. |
| GSM indicator light (Blue) | When GSM isn’t working, this light will be twinkling. When GSM works normally, the light will be always lighting. |
| OBD power connector | To connect the car OBD port to charge. |
| GPS antenna | GPS accuracy: 10 meters, 2D RMS |
| SIM card slot | 1 unit |
| Accessories |
1*user manual |
Vehicle OBD GPS tracker GT01 is one of the independently researched and developed GPS products from YUEBIZ Technology Co., Ltd. which adopted imported high gain GPS module and unique dual mode design, global commonly used GSM receiving antenna, with the lowest power consumption design, so it’s a most suitable and easily hidden and installed GPS tracker in car because of small type and light weight.
| Model | GT01 |
| Brand | YUEBIZ Technology |
| GSM frequency | Global commonly used 4 frequencies |
| GSM module | Quad band(GSM 850/900/1800 /1900 Mhz) |
| GSM positioning accuracy | 50-300 meters |
| GPS accuracy | 10 meters, 2D RMS |
| GPS sensitivity | -159 dBm |
| Speed accuracy | 0.1 meter/second |
| GPRS | Class 12, TCP/IP |
| Hot start | 2 second(all data is valid, start within 2 hours since the last positioning) |
| Warm start | 32 seconds(initialization data loaded, start after 2 hours since the last positioning) |
| Cold start | 38 seconds (first start, ephemeris cleared and then start, move out about 1,000 km and then start) |
| Max altitude | 18,000 meters |
| Max speed | 515 meters/second |
| Gravitational acceleration | <4 grams |
| Network | GSM/GPRS(class 12, TCP/IP) |
| Weight | 51 grams |
| Working voltage range | 6-50 V DC |
| Working temperature | -20 to +70 ℃ |
| Working humidity | 20-80% RH |
| Stand-by working current | 25 mA for 12 V |
| Operating system for phone APP | Android 2.3 and higher, iOS 5.0 and higher |
| Size | Length: 7.1 cm Width: 4.9 cm Height: 2.4 cm Packing size: 6*8.7*13 cm |
| Low power alarming | A warning message will be sent to computer webpage platform and phone APP if the battery power is too low. |
| Vibration alarm | A warning message will be sent to computer webpage platform and phone APP if the vehicle is shaking. |
| Geofence | A geofence can be set and the warning messages will be sent once the tracker got in/out the geofence. |
| Historical route replaying | The historical moving route of the latest 3 months(at least) of the watch can be replayed. |
| Base station auxiliary positioning | Support. |
| Residual battery power display | The residual battery power of the tracker can be displayed on the computer webpage platform and phone APP. |
| GSM blind zone storage | Positioning data will be saved when there is no GPRS signal until the signal is found and the data uploded. |
| Electricity outage alarm | A warning message will be sent to the computer webpage platform and phone APP once the tracker is out of electricity supplying(has been pulled out of vehicle OBD port). |
| Positioning Frequency | Support. |
-It’s charging by vehicle OBD port.
-It’s 24 hours online on computer webpage platform and phone APP.
-It’s cheaper than same type product for at least 20%. -It’s easy to hide in car because it’s small & lightweight so It can be used for anti-theft.-It binds phone number, which means, text message will be sent to another phone number when its voltage is too low and it got out or in the geofence.
-It supports inspection of its position and residual battery power by Android and iOS APP. -It supports base station auxiliary positioning so the accuracy is high. -It has internal shock sensor and movement recognition system so the warning message will be sent when the vehicle is shaking. -It can feedback the realtime position information by sending messages. -It supports global commonly used GSM quad band. -It has a function of GSM blind zone storage which can save the positioning data when there is no GPRS signal until the signal is found and the data uploded. -It’ll send a warning message once it out of charging(be pulled out from vehicle OBD port). -Its integration level is very high so it’s easy to install.-Its positioning frequency can be set.
-It’s dual mode positioning so the accuracy is high.
